Codes d'erreur Ekoenergetyka
Cette page couvre les bornes rapides DC Ekoenergetyka (EKO90 et modèles de la gamme Axon, référencés 3-21-xx.xxxx). Ekoenergetyka ne publie aucune liste de codes : tous les codes ci-dessous ont été relevés sur des bornes supervisées par Chargekeeper, avec le libellé envoyé par la borne.
Où lire le code : dans Chargekeeper, liste des bornes, détail des connecteurs, colonne
Information (ou liste des sessions en cours, colonne Information). Elle affiche
« code OCPP - code constructeur - information ». Voir Codes d'erreur constructeurs.
Comment Ekoenergetyka transmet ses erreurs
La borne envoie dans le champ code constructeur (vendorErrorCode) un code numérique à points, de 3 à 6 segments (par exemple 4.50.2, 100.30.23, 2.41.0.0). Le champ information contient un libellé en anglais, coupé à 50 caractères (limite d'OCPP 1.6) ; certains libellés sont des mots techniques plutôt que des phrases (rcd-dc, button:emergency-shutdown, batlow_sat). Le code OCPP est presque toujours OtherError, parfois EVCommunicationError.
-
Un code qui se termine par
.0peut signaler un retour à la normale : par exemple4.50.0« Power is no longer limited by module failure » après4.50.1ou4.50.2(puissance réduite à cause d'un module de puissance). -
Les codes qui se terminent par un grand nombre (par exemple
51.1.4.5.131072) ressemblent à des champs de bits ; leur libellé est seulementwarning. -
Un même code peut arriver avec des libellés différents (par exemple
1.1.7avecrcd-dcouerror:power-loss).
La signification de chaque segment du code n'est pas connue. La documentation technique d'Ekoenergetyka (manuels, liste des erreurs) est réservée au portail partenaires EkoDocs, accessible après création d'un compte. La console web locale de la borne (CMC, Charger Management Console) affiche l'historique et l'analyse des erreurs. Pour un diagnostic, demandez la liste des erreurs à Ekoenergetyka ou à votre mainteneur.
Codes relevés sur nos bornes, non documentés par Ekoenergetyka
Ces codes ont été reçus de bornes supervisées par Chargekeeper mais ne figurent pas dans la
documentation publique du fabricant. Le libellé est celui transmis par la borne elle-même.
| Code | Libellé transmis par la borne | Code OCPP |
|---|---|---|
1.1.3 |
— | OtherError |
1.1.4 |
powsup_sat |
OtherError |
1.1.5 |
batlow_sat |
OtherError |
1.1.7 |
rcd-dc |
OtherError |
1.1.8 |
error:power-loss |
OtherError |
1.1.9 |
button:emergency-shutdown |
OtherError |
1.1.16 |
door-opened |
OtherError |
1.2.3 |
rcd-ac |
OtherError |
1.8.31 |
dlbs:error |
OtherError |
2.1.1 |
No communication with I/O device number '1'. |
OtherError |
2.1.2 |
No communication with I/O device number '2'. |
OtherError |
2.40.0.0 |
No communication with the CSS module. |
OtherError |
2.41.0.0 |
No communication with the control pilot controller |
OtherError |
3.4.0.4 |
The DC contactor is open but should be closed. |
OtherError |
3.9.0.5 |
Overvoltage |
OtherError |
3.10.0.5 |
Insulation fault. |
OtherError |
4.10.0.5 |
Insulation warning. |
OtherError |
4.50.0 |
Power is no longer limited by module failure. |
OtherError |
4.50.1 |
Reduced power due to power module malfunction. |
OtherError |
4.50.2 |
Reduced power due to power module malfunction. |
OtherError |
4.50.3 |
Reduced power due to power module failure. |
OtherError |
4.50.4 |
Reduced power due to power module failure. |
— |
4.50.5 |
Reduced power due to power module malfunction. |
OtherError |
10.8.30 |
dlbs:warning |
— |
50.1.1 |
No communication with the power module (package No |
— |
50.1.5 |
No communication with the power module (package No |
OtherError |
50.2.7 |
No communication with the power module (package No |
— |
50.5.4 |
No communication with the power module (package No |
— |
51.1.1.5.16908288 |
warning |
OtherError |
51.1.1.5.67108864 |
warning |
OtherError |
51.1.1.81.36175872 |
warning |
— |
51.1.2.5.16908288 |
warning |
OtherError |
51.1.2.81.36175872 |
warning |
— |
51.1.3.5.16908288 |
warning |
OtherError |
51.1.4.5.131072 |
warning |
OtherError |
51.1.4.5.16908288 |
warning |
OtherError |
51.1.4.5.33685504 |
warning |
OtherError |
51.1.5.5.16908288 |
warning |
OtherError |
51.2.3.81.36175872 |
warning |
— |
51.2.4.81.2621440 |
warning |
— |
51.2.4.81.36175872 |
warning |
— |
51.3.5.81.36175872 |
warning |
— |
51.3.6.81.36175872 |
warning |
— |
51.4.1.81.36175872 |
warning |
— |
51.4.2.81.36175872 |
warning |
— |
51.5.3.81.36175872 |
warning |
— |
51.5.4.81.36175872 |
warning |
— |
60.0.1 |
Overtemperature warning: reading 80.1, limit 80. |
OtherError |
61.0.1.3 |
Temperature reading timeout from sensor number 0 w |
OtherError |
61.1.2.3 |
Temperature reading timeout from sensor number 1 w |
OtherError |
61.2.3.3 |
Temperature reading timeout from sensor number 2 w |
OtherError |
61.3.4.3 |
Temperature reading timeout from sensor number 3 w |
OtherError |
61.4.1.3 |
Timeout reading temperature sensor 4.1. |
OtherError |
61.5.2.3 |
Timeout reading temperature sensor 5.2. |
OtherError |
61.6.1.3 |
Timeout reading temperature sensor 6.1. |
OtherError |
61.7.2.3 |
Timeout reading temperature sensor 7.2. |
OtherError |
62.0.2 |
Timeout to receive data from the fast measurement |
OtherError |
62.1.34 |
Timeout to receive data from the fast measurement |
OtherError |
62.1.35 |
Timeout to receive data from the fast measurement |
OtherError |
90.4.1.0 |
DLBS: master contactors malfunction |
— |
100.1.1 |
Could not find the PLC device. |
OtherError |
100.10.1 |
Interruption of the CP line. |
OtherError |
100.15.1 |
Timeout_TT_EVSE_SLAC_init |
OtherError |
100.15.2 |
Timeout_TT_EVSE_match_MNBC |
OtherError |
100.15.3 |
Timeout_TT_EVSE_match_session |
EVCommunicationError |
100.15.4 |
Timeout_TT_match_join |
OtherError |
100.15.20 |
CP Fallback - BEB. |
EVCommunicationError |
100.15.21 |
CP Fallback - BFB. |
EVCommunicationError |
100.30.2 |
Could not start TLS server (-1): setNonBlocking: f |
OtherError |
100.30.21 |
Timeout (20 [s], max: 20 [s]) for establishing TCP |
OtherError |
100.30.23 |
TCP/TLS connection closed by the EV. |
EVCommunicationError |
100.40.2 |
V2G sequence error. |
EVCommunicationError |
150.0.0 |
Vehicle error (CCS). |
EVCommunicationError |
150.1.0 |
warning |
OtherError |
240.0.0 |
— | OtherError |
240.1.101.17 |
— | PowerMeterFailure |
Sources
- EkoDocs, portail de documentation technique Ekoenergetyka (accès après inscription) — https://ekoenergetyka.com/ekodocs-technical-documentation-portal/
- Ekoenergetyka, logiciel embarqué des bornes (firmware LEko, console CMC) — https://ekoenergetyka.com/software-solutions/charging-station-embedded-software/
- E-Flux, guide de raccordement des bornes Ekoenergetyka (source non officielle) — https://help.e-flux.io/en/articles/8459333-manual-ekoenergetyka